![]() Some systems also allow this to be set on predefined port ranges, for example one mode for ports 1-4 and another for 5 and 6. RAID is also a more involved configuration than a single drive setup, and may not provide noticeable benefits under some types of usage. RAID modes using multiple SSDs can provide best-in-class performance and added protection against data loss, but in many cases RAID modes block Trim entirely depending on the RAID controller or motherboard chipset the drives are running under. This can contribute to a loss of performance above and beyond what is already lost from employing an older standard. IDE mode may be required in legacy hardware or may be the only available option in older systems, but often has reduced performance and can impact Trim support on an SSD. This is usually the default configuration on an OEM-preinstalled OS or factory-new motherboard. This mode offers high performance and easy setup and takes best advantage of an SSD's features. We recommend using AHCI mode for our drives. This mode is set prior to SSD installation and can be difficult to change after an OS is installed because drivers within your OS will be configured around this setting during installation. Always refer to your manufacturer documentation for the most applicable information for your hardware. The screenshots featuring examples will most likely differ from your specific system configuration. This article will also focus on variables around your SSD's physical installation and your BIOS/UEFI. Equivalents are usually present in non-Windows operating systems, but slight variations in how another operating system (OS) or even different versions of Windows manage these mean you should check support or documentation from your OS vendor to ensure ideal settings and stability. Some sections of this will focus on Windows® settings and best practices. Where possible, links to documentation supporting these changes are included. If you are unfamiliar with what is being discussed around a given variable, feel free to disregard its contents rather than risk incorrectly adjusting a setting and introducing instability in your system. Keep in mind these adjustments are optional, and with only a couple of exceptions, the gains are so minor that most users may never see a difference and never bother to make them a priority. With some minor tweaks, both prior to and after you install a new SATA solid state drive (SSD), you can gain performance boosts from your system above and beyond those from the SSD upgrade itself.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |